Decorative Paints
Enhance Paint Properties with Calcium Carbonate Solutions
Calcium carbonate can contribute to the physical and optical performance of decorative paints and coatings. By selecting the appropriate particle-size distribution and mineral characteristics, formulators can tailor their systems to specific performance and formulation objectives.
Suitable mineral grades can support wet-scrub resistance and optical properties such as brightness, opacity and gloss, depending on the formulation.
Boost opacity in paints
Opacity, also known as hiding power or contrast ratio, is the ability of a coating film to hide what lies beneath.
Alphastone calcium carbonate mineral fillers can be used to boost the opacity of decorative paint by enhancing titanium dioxide performance and supporting the even distribution of pigment particles.
Adjust Sheen Values
Where low-sheen formulations require a matting effect, modified calcium carbonate technologies can complement conventional calcium carbonate-based coating systems. Appropriate mineral design can help adjust sheen at controlled addition levels while also contributing to opacity.
Improve Sustainability in Decorative Paints
Mineral technologies can create several opportunities to improve the sustainability profile of decorative paints, including partial replacement of higher-impact raw materials, use of safer alternatives, incorporation of recycled mineral content and opportunities for insulation or weight reduction.
The specific sustainability benefit depends on the selected material, formulation and supporting technical or certification data.
A Broad Raw Material Portfolio
Complementary raw materials can be combined with mineral solutions to help formulators achieve specific performance targets. Depending on the available supply portfolio and application, these may include binders, dispersing agents, rheology modifiers, titanium dioxide and other additives.
Roof Coatings and Cool Roofs
Enhance Elastomeric Roof Coatings and Cool Roof Formulations
Improve the performance of elastomeric roof coatings and cool roof formulations while optimizing formulation costs through the use of lightweight mineral fillers.
Elastomeric roof coatings create a protective and sealing layer over roofing surfaces, helping prevent water penetration and reducing the effects of long-term exposure to weather conditions. ALPHASTONE’s lightweight mineral fillers can contribute to improved thermal insulation, solar reflectance, and reduced coating weight, supporting efficient and durable roofing solutions.
Lightweight Fillers for Cool Roofs
ALPHASTONE’s lightweight fillers can be incorporated into cool roof coating formulations to support improved thermal performance. Their low density can help reduce heat build-up and contribute to better thermal insulation, while supporting formulations designed to reflect solar radiation.
The use of lightweight fillers can also help reduce the overall weight of the coating and provide manufacturers with greater flexibility when optimizing formulation performance and cost.
Higher Solar Reflectance
The Solar Reflectance Index (SRI) is an important consideration for buildings located in warm climates, where managing heat gain and cooling requirements is a major concern.
ALPHASTONE’s lightweight fillers can contribute to improved SRI performance in elastomeric roof coatings by supporting higher solar reflectance and effective thermal emittance.
In addition, our lightweight fillers can enhance the mechanical performance and weathering resistance of roofing coatings. Their use can help reduce the tendency of coatings to crack, supporting greater flexibility and elongation and contributing to longer-lasting roof protection.
Reduce the Weight of Your Coatings
ALPHASTONE’s lightweight fillers can replace conventional, higher-density mineral fillers, helping reduce the overall weight of the finished coating. This can provide several practical benefits:
- Easier handling and transportation: Less material weight can simplify the handling, transportation, and application of coatings on site.
- Improved coverage and yield: Lightweight fillers can increase the coating volume obtained from a given formulation, potentially reducing the cost per square meter of applied coating.
- More efficient transportation: The reduced weight of the coating can allow greater product volume to be transported within available truck capacity, helping improve transportation efficiency and potentially reduce the associated carbon footprint.
Industrial Coatings
Calcium Carbonate for Protective Coatings
Beyond conventional mineral fillers, ALPHASTONE offers a range of Calcium Carbonate grades designed with different particle-size distributions and optical characteristics to meet the requirements of various coating formulations.
The choice of filler can have a significant impact on the final properties of paints and protective coatings. By selecting the appropriate Calcium Carbonate grade and particle size, formulators can optimize important characteristics such as surface appearance, opacity, gloss, and wet-scrub resistance.
Calcium Carbonate is widely used in paints and coatings as an effective mineral component. However, its role extends beyond that of a simple extender, as its physical and functional properties can contribute to the overall performance of the finished coating.
Ultrafine Ground Calcium Carbonate and Modified Calcium Carbonate can provide additional functional benefits in decorative and protective coating formulations, helping formulators optimize the use of titanium dioxide while maintaining the desired coating performance and appearance.
Importance of Calcium Carbonate
Industrial coatings are designed primarily to protect surfaces from demanding environmental conditions and long-term exposure. Compared with emulsion paints, they are generally formulated below the critical pigment volume concentration and contain a lower proportion of fillers. Nevertheless, selecting the right filler remains important, as it can influence key coating characteristics such as gloss, viscosity, and overall durability.
In addition to its extensive use in primer formulations,
Calcium Carbonate is also suitable for topcoat applications where high gloss and long-term gloss retention are required. It can further be used to control and adjust the desired gloss level in other coating technologies, including powder coatings.
A Sustainable Coating Technology
Powder coatings are widely used as protective finishes to help prevent corrosion and extend the service life of coated surfaces. They are applied across a broad range of industries, including furniture, household appliances, automotive components, and architectural structures, with demand for powder coating solutions continuing to grow.
Powder coating technology offers an efficient approach to surface protection with effective material utilization. As the process generally does not rely on conventional solvents or biocides, it can provide a practical coating solution with reduced use of certain substances associated with conventional liquid coating systems.
ALPHASTONE’s Comprehensive Portfolio
- Natural mineral solutions that can support more sustainable powder coating formulations.
- A broad selection of mineral-based solutions designed to complement resins, hardeners, and other formulation components.
- Functional mineral additives that can contribute to specific coating performance requirements.
- Reliable supply capabilities supported by ALPHASTONE’s production and distribution network, helping provide consistent product availability to customers.
Our Investment in Powder Coatings Expertise
ALPHASTONE is committed to supporting the development and optimization of powder coating formulations through technical expertise and application-focused solutions. Our technical capabilities enable us to evaluate mineral solutions under conditions that closely represent industrial coating processes.
Our technical team works closely with customers to assess coating performance and identify opportunities to optimize formulations. Our solutions can help improve formulation efficiency, optimize costs, reduce material-related environmental impact, and enhance important properties such as density, gloss, and overall functional performance.
Through close technical collaboration with our customers,
ALPHASTONE aims to understand formulation challenges, develop practical solutions, and support the successful implementation of improved powder coating systems.
Paints and Coatings Webinars
Explore practical insights and technical knowledge on how functional mineral solutions can help improve the performance of paints and coatings while optimizing formulation costs and supporting more sustainable coating technologies.
Discover how high-quality mineral solutions can contribute to enhanced coating properties, efficient formulation design, and reduced environmental impact.
How Can You Meet Ecolabel Requirements as Talc Faces Regulatory Changes?
Paint and coatings manufacturers are increasingly evaluating the regulatory and sustainability requirements associated with talc-containing formulations. Changes in the regulatory status of certain talc materials may create additional considerations related to product safety, labelling, formulation choices, and long-term compliance.
At the same time, ecolabel schemes such as the
EU Ecolabel apply specific criteria concerning substances with certain hazard classifications. As sustainability requirements become increasingly important across the coatings industry, manufacturers may need to review their raw materials and consider alternative mineral solutions that can support both technical performance and applicable environmental requirements.
ALPHASTONE can support formulators in evaluating functional mineral solutions for paint and coating applications, helping them explore formulation alternatives while maintaining the required performance characteristics.
Talc Replacement Webinar
This webinar explores practical approaches for replacing talc in paint and coating formulations while maintaining the performance requirements of the finished product.
ALPHASTONE’s mineral solutions, including Calcium Carbonate and other functional minerals, can provide formulators with alternative options when adapting formulations to changing regulatory and sustainability requirements.
Learn how alternative mineral fillers can support important coating properties such as opacity, durability, surface appearance, and scrub resistance. The webinar also highlights formulation considerations that can help manufacturers develop efficient, compliant, and more sustainable coating solutions without compromising the desired performance.
Discover practical strategies for evaluating mineral alternatives and optimizing coating formulations for evolving market requirements.